[KT-205 800g ] Electric Magnetic Polishing Machine for gold & silver Jewelry , stainless steel 800 G Polish Capacity

Magnetic Tumber Polishing Machine

Working Principle:

Applications

• Suitable for polishing / Finishing Non-Ferrous Metal Parts, rigid plastics and precision parts etc.
• The Magnetic tumbler has multi-effects of chip removing / deburring , Chamfering, Polishing/Finishing and cleaning etc.
• It is also used for polishing irregular parts such as the blind angle or cracks of hole parts, tubulous parts.
• Suitable for polishing and grinding metals like gold, silver, copper, aluminum, zinc, magnesium, iron, stainless steel,and non-ferrous metals like hard plastics. Ideal for precision parts, achieving deburring, chamfering, polishing, and cleaning. Works wonders on irregular shapes, holes, tubes, and hard-to-reach areas. The process is automated, fast, and safe.

Operation Tips

• Adjustment: Start with a few workpieces, gradually adding more until rotation slows but remains continuous. Imbalance or stillness will result in uneven polishing and longer processing time.
• Preparation: Before first use, clean workpiece surfaces of oil and grease. Oil can discolor workpieces, pins, water, and the polishing tank. Use cleaning solution and run the machine empty for 30 minutes (preferably with water changes every 15 minutes) to clean pins and tank.
• Usage Cautions: The machine has an overheat protection feature that pauses operation. Allow it to cool before resuming. When using new magnetic pins, run them with water and 10g of magnetic paste for 20 minutes before adding workpieces. Magnetic paste enhances shine, corrosion resistance, and oxidation protection.

Special Note

• The magnetic polisher primarily removes surface burrs, chamfers, and polishes holes/crevices, but it doesn't achieve a mirror finish.
• Post-polishing manual work may be needed to remove traces.
• Colors may vary due to monitor settings, camera angles, and lighting. Please refer to the actual product.

Consumer Advisory

• Before using your machine, please read all safety instructions. They are for your protection and should always be allowed to reduce the risk of personal injury or damage to the tool.
• Never operate your machine during a perceptible power decrease. Turn the machine off and do not use unitl power is fully restored.
• The magnetic disk that actually turns the pins is made up of many powerful magnets that are precisely placed in a cast disk.
• The alternating polarity is constantly changing, thereby allowing the media to move freely in a liquid solution that is constantlychanging its make-up. This combined with centrifugal force, allows for super quiet and fast time cycles to perform a myriad of applications.
• Ensure electrical safety by following the manual and taking necessary precautions. Keep out of reach of children.

Photos

Magnetic Tumbler

Images	Model No.	Machine Size(mm)		Weight (Kg)	Capacity	Rotate Speed	Voltage	Power
		Buket	Machine	Pins&Jewelry	(g)	(rpm)	(V)
	KT-100	100 x 135	210 x 210 x 300	10	400	Constant speed 2000rpm	220V / 110V	200W
	KT-130	130 x 100	280 x 260 x 400	13	600	Constant speed 2000rpm	220V / 111V	250W
	KT-185	180 x 100	280 x 260 x 400	13	600	Constant speed 2000rpm	220V / 110V	250W
	KT-185S	180 x 100	280 x 260 x 400	13	600	Constant speed 2000rpm	220V / 111V	250W
	KT-205	195 x 135	270 x 270 x 400	20	800	Constant speed 2800 rpm	220V / 110V	370W
	KT-360	290 x 170	360 x 360 x 500	30	1300	Frequency control spped 500-4000 rpm	220V / 110V	750W